This week, we are going back to the basics! Hair clogging up the drain is one of the most common (and most annoying) issues you’ll have to deal with in your bathroom. Even if you use a drain stopper, enough hair could eventually slip into your drain to slow it down. To get your drain flowing again properly, follow our tips below!
Alternate baking soda and vinegar and plunging
You’ll need some grease-fighting dish soap, a cup of vinegar, a cup of baking soda, boiled water and a cup plunger. First, squirt some dish soap down the drain. Chase that dish soap with the cup of baking soda. Make sure the baking soda actually gets down the drain. Pour the cup of vinegar down immediately afterward. This should create a chemical reaction that causes fizzing in your drain.
After the fizzing dies down, wait five minutes and boil some water. When the water’s boiling, pour it slowly down the drain. The fizzing baking soda and vinegar help break up the hair, and the water helps it pass through the drain. Now you should start plunging. Run some water down the drain and plunge using your cup plunger as if you were trying to remove a typical clog. If your hair clog is particularly stubborn, you may have to repeat this process a few times.
Remove the drain stopper and use tweezers
If plunging didn’t work, pulling the hair out will probably be more effective. You’ll need a screwdriver, rubber gloves, a flashlight and needle-nose pliers. First, remove the drain stopper. You might be able to pry your stopper off right away, but chances are you’ll need your screwdriver. Take this opportunity to clean off the drain stopper in your sink. Just make sure any hair in the stopper doesn’t fall into another drain!
After removing the stopper, you should have a clear opening to the drain below. Shine the flashlight into the drain and you’ll probably see a clump of hair. Put on your gloves and use your needle-nose pliers to reach in and grab the hair. If your pliers can’t reach or fit, you could also try making a makeshift snake out of a hanger. After removing the hair, run some hot water down the drain before replacing the stopper to make sure everything’s working properly.
Use a zip-it tool
A zip-it tool is a long, flexible and barbed stick of plastic designed to clear drains. They’re inexpensive, reusable or disposable and available at most hardware stores. To use a zip-it tool, you simply insert the barbed length down into your drain. As you pull the zip-it back out, the barbs will catch any hair in the drain back out with it. Zip-its are flexible enough to fit through most drain stoppers, but we recommend removing the stopper anyway.
For best results, try twisting or contorting the zip-it tool this way and that as you insert and pull it out. As always, follow up your initial cleaning with a hot water rinse. In fact, you may want to follow the baking soda and vinegar steps above after using a zip-it tool. Consider buying a few zip-it tools to keep on hand in your bathroom. That way, you’ll be prepared next time you need to remove hair clumps.
Remove the whole drain
You’ll need a flat-head screwdriver, plug wrench, adjustable wrench, locking needle-nose pliers, standard pliers and gloves. This process is a bit more involved than the other tips listed here, so we’ll run you through it step by step:
- Remove the stopper.
- Insert the plug wrench into the drain opening and fit it into the crossbars of the drain.
- Grip the plug wrench with your wrench or pliers and turn counterclockwise to loosen the drain from the threading.
- When the drain is loosened, remove the plug wrench and insert the needle-nose pliers.
- Lock the needle-nose pliers in place when you clamp them around the “X” crossbar in the drain.
- Grip the needle-nose pliers with your conventional pliers or wrench as low as possible. Use the pliers or wrench to slowly turn the locked needle-nose pliers counterclockwise.
- When the drain is loose enough, turn the needle-nose pliers by hand until you can pull the entire drain out.
If you have any questions, give us a call at 1-800-989-0299! We’re available 24/7 for all your plumbing and HVAC needs!
